RS232 Serial to Android Converter CableThe RS232 Serial to Android Conversion Cable is specifically designed to work with the Suntech ELD solution. The Cable connects the Suntech ELD device to an Android tablet providing both a serial communication and charge cable through a direct connection.

6-pin single row Serial 2 connection

and the USB directly to the PC

Passes through the LED and Buzzer controls of the RFID reader if available

28ft) in length with connections populated for Power

9-pin J1939 Type I passthru length of 0

Cable provides three 9-pin j1939 Type 2 connectors that allow a device to be connected to the vehicle

(works with CalAmp products to display debug from AUX port)

These card SKUs will have the 'w' at the end to designate that they are 'writable'

6 connections are tied to the OBDII connector

HTA-015: Compatible with EM 125kHz

and 495 that have high temp tolerances of 250 degrees Fahrenheit recommended for more permanent installation)

but all 9 connections are populated on the j1939 passthru