Tungsten carbide burr Blue-Tec coated KUD/ HP-1 d1=16 / l2=14,0 / d2=6 / l1=60mmTungsten carbide burr Blue Tec coated KUD HP 1 d1=16 l2=14,0 d2=6 l1=60mm

4712 CompressedAirProfitHorizontalGrinders KAM16LR for Burrs Shank6

Without the illustrated cutting tools

00x22mm 160Z

0 / l2= 32 / d2= 6 / l1= 77mm BESTSELLER

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

window profiles - NEGATIVE 270x2

window profiles - POSITIVE 550x3

Tungsten carbide burr Blue-Tec coated ZYA/ HP-4 d1=6 / l2=18 / d2=6 / l1=50mm

Tungsten carbide burr uncoated KUD/ HP-4 d1=4 / l2=3

Tungsten carbide burr uncoated TRE / HP-3 d1= 8

Wherever reduced interference contours are required

- Axial sealed with two O-rings