Relay DC 24V 7ASPDT(Single Pole Double Throw) relay is used as a switch for high current AC DC appliances which need to be controlled from a microcontroller or sensor output. 24V PCB Mount Sugar Cube SPDT Relay instead of its small size can switch a load of 7A connected to it. The coil resistance of this relay is 1. 6k ohm whereas the coil current is 15 mA. The trigger voltage for this relay is 24V. There are 5 pins in this relay i. e, Coil end 1, Coil end 2,

such as the Sense HAT

These are Carbon Film Resistor with a value of 22k ohm 1/2W and tolerance of ±5%

The operation frequency is reduced to 48KHz from 180KHz when a short protection function happens

6M ohm 1/4W and tolerance of ±5%

Configuration

Does not lock in the ON position

as well as a cut-out for easy micro SD card insertion and removal

98% copper with adhesive back

These are Metal Film Resistor with a value of 68 ohm 1/4W and tolerance of ±1%

3V  Switching Regulator Max Current Output  3A  Total length  150 mm  Connector Type XT60

Input Pin 1

Easy to Install on Breadboard