3mm Red / Blue Bi-Colour 3 Pin LED (Common Anode)A small red and blue bi colour 3mm light emitting diode with a common anode that produces consistent light and consumes little power, contained in a milky white packaging. It is suitable for PCB or panel mounting. In a shared anode design, diodes are linked. The common anode is the centre leg, and it is the place where a resistor should be installed for the protection of the LED. Pin Configuration Pin Name Description Cathode Negative terminal of Red

Maximum peak output current  2

These are Metal Film Resistor with a value of 180k ohm 2W and tolerance of ±5%

Model SCT-013 Max

Model SKBPC5016 Type Bridge Rectifier Diode Working Peak Reverse Voltage 1600 V RMS Reverse Voltage VR(RMS) 1120 V   Maximum DC Blocking Voltage 1600V Average Forward Rectified Output Current- 50A Peak Reverse Current at 25°C  10µA Operating and Storage Temperature Range -40°C TO 150°C

5 V to +/- 22 V

and withstands temperatures up to 155 °F

56 display size

preventing the switch from moving freely and placing it in the incorrect position

Stable With a Low-ESR

This 3x4x2mm SMD Tactile Switch is widely used as a standard input Button on PCBs

allowing Makers to use the strip as a single unit with ten connections on each side

These are Carbon Film Resistor with a value of 56 ohm 1/2W and tolerance of ±5%