3/8" US Jetting HoseThe 3 8" US Jetting high pressure jetting hose is available in 100', 200' and 300' lengths. It has a 4000 PSI working pressure and 10,000 PSI burst pressure. This sewer hose is generally used on jetters ranging 3000 4000PSI at 10 12GPM and performs best in pipe sizes 3" 6".

Type of Camera Rod Size Rod Length Pipe Size Large 1/2 300 12 Mid 1/2 200 10 Mini 3/8 200 6 Other lengths and sizes available upon request

The inserts are steel

Your existing Warthog jetting tool can easily be converted into a powerful descaling tool by simply changing the head

If the nozzle is spinning much faster than when new

USJ RPD Chisel Nozzles have one forward firing jet (except the 1/2" option which has 4 forward jets) combined with the sharp edges of the nozzle to allow for maximum blockage penetration

The 5/8" Piranha high tensile performance hose has a temperature range from a minimum of -40 degrees Fahrenheit to a maximum of 150 degrees Fahrenheit

The ENZ BULLDOG NOZZLE has a controlled rotation that has been built with a clever oil free braking system and can be used with either fresh or recycled water

drain out as much of the old fluid as possible and add new viscous fluid to cover the top bearing and wave spring

While the hose is 5/8" diameter

there are likely others

This sewer jet nozzle requires Fast Viscous oil to control the rotation of the nozzle

Basic requirements for safety during jetting are hand and eye protection