Studs DIN 6379 M6x50Version: Rolled thread. Application: For individual combination of T bolts in conjunction with T nuts and tenons, nuts and plain washers. Standard: DIN 6379 Material: Heat treated steel Strength class: M6 M12 = 10. 9 M14 M30 = 8. 8

sleeves and tool arbors

Low-vibration boring barsWith internal coolingLonger durability of insertsFor longitudinal and plane turningSetting angle: 93°Delivery: without inserts

For longitudinal and plane turning

206 x 56 x 24

With securing screws and Tee-nuts

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

the coolant tube can be moved only to a minimum degree according to DIN (±1°)

DIN 1835 form A+B+E and DIN 6535 form HB+HE (larger than Ø 20 mm only with reduction sleeve)

Thread confi guration with a special design

With clamping screw

bei Ø 6 – Ø 32 mm = h238

For mounting drill chucks